Sedikit Info Seputar
Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617
Terbaru 2017
- Hay gaes kali ini team Lampu Informasi, kali ini akan membahas artikel dengan judul Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617, kami selaku Team Lampu Informasi telah mempersiapkan artikel ini untuk sobat sobat yang menyukai Lampu Informasi. semoga isi postingan tentang
Artikel flash motorola, yang saya posting kali ini dapat dipahami dengan mudah serta memberi manfa'at bagi kalian semua, walaupun tidak sempurna setidaknya artikel kami memberi sedikit informasi kepada kalian semua. ok langsung simak aja sob
Judul:
Berbagi Info Seputar
Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617
Terbaru
link: Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617
Berbagi Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617 Terbaru dan Terlengkap 2017
Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617.
Preparations before flash.
- Flashing process will erase all data and file stored in Motorola Droid Xyboard 10.1 MZ617 internal memory. So, we recommend you to always back up it before perform flash this device.
- Flashing process will take a while, therefore don't let your battery at empty state. Try keep your battery at 78% minimum of capacity.
- Use original USB cable to connect between your Motorola Droid Xyboard 10.1 MZ617 to the computer.
- Make sure Motorola Droid Xyboard 10.1 MZ617 driver correctly installed on your computer, If you don't have this driver yet. download via this link below.
- Then download and install RSD lite Multi Flash tool from official website.
- Now, download Motorola Droid Xyboard 10.1 MZ617 firmware file.
https://androidmtk.com/download-motorola-usb-drivers
http://rsdlite.com/rsd-lite-download/
https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/VRZ_9.8.2OT_127_MZ617_CFC_1FF.xml.zip
Flashing Motorola Droid Xyboard 10.1 MZ617.
- Now, boot Motorola device to bootloader mode. How to do it ?
- Power off the phone, by press and hold power button for a seconds, it will completely turn off the device.
- Now, press and hold both volume down + volume up button.
- Then, connect your Motorola Droid Xyboard 10.1 MZ617 to the computer via USB cable.
- Make sure your Motorola Droid Xyboard 10.1 MZ617 successfully detected on your computer via bootloader mode.
- If failed, try to change your USB cable or computer port.
- Now, Open RSD Lite from start menu.
rsd lite flash tool - Click the button assigned with red circle show at picture above to load Motorola Droid Xyboard 10.1 MZ617 firmware.
- Fimrware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
- Once your firmware successfully load, RSD lite should look like picture shown below.
rsd lite - Now click start button.
- Flashing process will start automatically without your interference.
- Wait a while until flashing your Motorola Droid Xyboard 10.1 MZ617 finish.