Sedikit Info Seputar
Guide | How to Flash Firmware Motorola Moto E (2nd Gen)
Terbaru 2017
- Hay gaes kali ini team Lampu Informasi, kali ini akan membahas artikel dengan judul Guide | How to Flash Firmware Motorola Moto E (2nd Gen), kami selaku Team Lampu Informasi telah mempersiapkan artikel ini untuk sobat sobat yang menyukai Lampu Informasi. semoga isi postingan tentang
Artikel @guide,
Artikel flash motorola, yang saya posting kali ini dapat dipahami dengan mudah serta memberi manfa'at bagi kalian semua, walaupun tidak sempurna setidaknya artikel kami memberi sedikit informasi kepada kalian semua. ok langsung simak aja sob
Judul:
Berbagi Info Seputar
Guide | How to Flash Firmware Motorola Moto E (2nd Gen)
Terbaru
link: Guide | How to Flash Firmware Motorola Moto E (2nd Gen)
Berbagi Guide | How to Flash Firmware Motorola Moto E (2nd Gen) Terbaru dan Terlengkap 2017
Guide | How to Flash Firmware Motorola Moto E (2nd Gen).
- XT1527 (USA),
- XT1511 (USA),
- XT1505 (Global),
- XT1524 (Global),
#1 Step.
- All file, data, accounts and installed App in internal memory are wiped during flashing process. So, try to back up it first before flashing the device.
- The battery at least has 75% of minimum battery capacity.
- To keep a good connections between your Motorola Moto E (2nd Gen) device and the computer, we recommend using an original USB cable.
- Install Motorola Moto E (2nd Gen) driver on your computer. If you don't have the driver yet, you can get this driver via this link below.
- To flash a fimrware into the Motorola Moto E (2nd Gen) you need download and install RSD Lite on your computer, get the file below.
- The appropriate firmware for your Motorola Moto E (2nd Gen) device, you can get below ; >
- Motorola Moto E (2nd Gen)
https://androidmtk.com/download-motorola-usb-drivers
http://rsdlite.com/rsd-lite-download/
https://firmware.center/firmware/Motorola/Moto%20E%20%282nd%20gen-2015%29/
#2 Step - Flashing Process.
- Boot your Motorola Moto E (2nd Gen) device to Fastboot mode. How to do it ?
- Power off the Motorola Moto E (2nd Gen), by press and hold power button for a seconds, it will completely turn off the device.
- Now, press and hold both volume down + volume up button.
- Then, connect your Motorola Moto E (2nd Gen) to the computer via USB cable.
- Make sure your Motorola Moto E (2nd Gen) successfully detected on your computer via Fastboot mode.
- If there is something wrong, you can try to change the computer port or USB cable.
- Then, Open your RSD Lite software on your computer from start menu.
- Then click the button marked with the arrow and red circle shown at picture below to load Motorola Moto E (2nd Gen) firmware.
RSD Lite load a firmware - Firmware file should have this extensions (*.hs, *.xml, *.shx, *.sbf, etc)
- Once your Motorola Moto E (2nd Gen) firmware successfully loaded, RSD lite flash tool should look like picture shown below.
rsd lite - flash Motorola Moto E (2nd Gen) - Now click start button at RSD lite window to begin the flashing process.
- Flashing your Motorola Moto E (2nd Gen) will start automatically without your interference.
- Just wait a while until flashing your Motorola Moto E (2nd Gen) done.